Two types of tire-killers are produced by "TiSO": automatic with hydraulic mechanism and semi-automatic with springs or with lever drive.

Main difference between these types – possibility of free two-directional driveway organization. So, semiautomatic device is always in raised position and can be closed when vehicle tires will push them while driving on them (or by turning special lever). In its turn, hydraulic device can be closed in any time for unlimited period.

Both types of tire-killers, as well as other blockers of "TiSO" can be mounted on road surface or with submerge.

Our company offers tire-killers with various "knife" height: from 40 to 250 mm. Selection of knife-height is depending from checkpoint and transport type, which passes through it: for big trucks the best choice is high "blades", and small "knives" are better for standard cars. It should be noted, that height-choice is important only for semi-automatic tire-killer. Thus, free pass through hydraulic (automatic) device is possible only if "knives" are in closed position. In this case, there is no possibility that "knives" will damage the car bottom.

Tire-killers with hydraulic mechanism

Hydraulic tire-killers – are reliable and easy-to-use solution for territory protection. Hydraulic pump is been installed inside the device, so like it is in SpeedBump, just electronic control box should be installed outside.

Various types of hydraulic tire-killers allows to choose exactly that option, which will ideally solve your project requirements: one or two protected sides, positioning relative to the axes.

All types of this device can be installed on road surface (with ramps), as well as with submerge.

Tire-killer with mechanical drive

Mechanical driven tire-killers will be the best option for places, where is no possibility to connect the electricity.

We offer two types of such devices: with springs or with lever drive. In first case – knives are always in raised position and pushed down by tires. In second – knives can be closed by rotating lever, or by joining (connecting) it with barrier. In this case, you get device which works synchronously with barrier.

Models with installation on road surface or with submerge are available.

Product specifications and complete sets may differ from that shown on the photo.